R6P Silver Blue-2S-Strengh Power Technology Co.Ltd.

PRODUCTION

Changzhou Strengh Power Technology Co.Ltd

Product category

What is the battery of the air conditioner remote control

Under normal circumstances, home appliance remote controls use AAA batteries, while cameras, shavers, and wall clocks use AAA batteries. Therefore, the air conditioner remote control is also a AAA battery. If we are not sure, we can determine it by measuring the diameter and length of the battery. No. 7 battery is 43.6 mm high and 10.1 mm in diameter, while No. 5 battery is 14 mm in diameter and 49 mm in height.

New Factory

03/01

What is the difference between acid batteries and alkaline batteries?

03/30

What is the difference between acid batteries and alkaline batteries?

03/30

R6P Silver Blue-2S

The company mainly produces over 50 varieties of alkaline batteries, carbon batteries, button type lithium manganese batteries, and other products, which are widely used in electronic appliances such as automobiles, computer motherboards, remote controls, and so on

Keywords: alkaline battery | button type lithium manganese battery | carbon battery

Category:

Industrial outfit

Message

Contact

Model:

R6P

Standard:

1.5V

Product Size:

14.5（D）*50.5（H）

Weight:

14g

Package:

Shrink/hang card

Certification:

CE，ROHS，SGS，REACH，UL，KC，UN38.3，MSDS

E-mail：zoey@anyida-power.com
Tel：0519 -83270441

Detailed description

1.Scope

This specification governs the technical requirements of Daily-max Carbon Zinc battery of R6P/AA. If it doesn’t list the other detailed requirements, the technical requirements and dimensions of battery should meet or above GB/T8897.1 and GB /T8897.2.

1.1Reference Standards

GB/T8897.1 (IEC60086-1,MOD)（Primary Battery Part 1:General）

GB/T8897.2 (IEC60086-2,MOD)（Primary Battery Part2:Size and Technical requirements）

GB8897.5 (IEC 60086-5,IDT)（Primary Battery Part5：Safety of batteries with aqueous electrolyte）

1.2Environmental Protection Standard

The battery meets the standard of EU battery directives 2006/66/EC.

2.Chemical system, Voltage and Designation

Electrochemical system: zinc - manganese dioxide (ammonium chloride electrolyte solution), does not contain mercury

Nominal voltage:1.5V

Naming :IEC： R6P ANSI: AA JIS:SUM-3 Others: 15F

3.Battery Size

Conform to the requirements of the brief

3.1 Acceptance tool

Using vernier caliper measurement precision is not less than 0.02 mm, measure to prevent the battery short circuit, one end of the caliper head card should be labeled as a layer of insulating materials。

3.2 Acceptance methods

The GB2828.1-2003 normal inspection sampling plan at a time，special inspection level S-3，acceptance quality limit AQL=1.0

4.Weight and discharging capacity

Typical Weight: 14.0g

discharge capacity:800mAh(load 43Ω，4h/day,20±2℃，RH60±15%, final

voltage 0.9V)

5.open-circuit voltage、closed - circuit voltage and short-circuit current

items	OCV（V）	CCV（V）	SCC（A）	sampling standard
After 2 months, new battery	1.62	1.40	4.0	GB2828.1-2003 Normal inspection sampling plan, special inspection level S-4，AQL=1.0
After 12 months at room temperature	1.58	1.30	3.00
Test conditions	load resistance 3.9Ω, measuring time 0.3 seconds，temperature 20±2℃

6.Discharging Ability

temperature：20±2℃
Discharge Conditions			GB/T8897.2 National standard requirement	Shortest Average Discharging Time
Discharge load	Discharge Time	Cut-off discharge voltage		2 months, new battery	After 12 months at room temperature
10Ω	1h/d	0.9 V	4.1h	6h	5.4h
43Ω	4h/d	0.9 V	27h	29h	27h
1.8Ω	15s/m,24h/d	0.9 V	75 cycles	150 cycles	135 cycles
24Ω	15s/m,8h/d	1.0 V	11h	15h	13.5h
3.9Ω	1h/d	0.8 V	65min	130min	115min
3.9Ω	24h/d	0.8 V	/	95min	85min

Satisfaction Standard:

1)9 pieces of battery will be tested for each discharging standard;

2)The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement. Then the batch battery performance test qualified.

3)If nine section of the battery discharge average less than the specified value of minimum average discharge time and (or) is less than the specified value of 80% of the battery number more than 1,we should take another 9 batteries to test again and calculate the average. Calculation results conform to the requirement of article 2, the batch battery performance test qualified. If it does not conform to the requirement of article 2, the batch battery performance test is unqualified, and no longer test.

7.Anti-leakage ability

items	Conditions	requirement	Acceptance Standard
Over-discharge	at temperature 20±2℃; relative humidity: 60±15% RH , load 10Ω , Discharge one hour everyday until the voltage turn to 0.6V	No leakage recognized by eyes	N=9 Ac=0 Re=1
high temperature storage	Stored in 45±2℃，Under the environment of relative humidity to 90% RH for 20 days		N=30 Ac=1 Re=2

8.Safety Characteristics

items	Condition	Requirement	Acceptance Standard
External short circuit	At temperature 20±2℃，With wires to the battery positive negative switched on 24 hours	No explosion allowed	N=5 Ac=0 Re=1

9.Signs

The following markings will be printed, stamped or impressed on the body of battery:

1.Designation: R6P/ AA

2.Manufacturer or trademark：Daily-max

3.Polarity：“+”and“-”

4.Expiration date deadline or manufacturing time

5.The attention notes for safe use.

10. Cautions for Use

1.Since the battery is not manufactured for recharging, there are risks of electrolyte leakage or causing damage to the device if the battery is charged.

2.The battery shall be installed with its “+” and “-” polarity in a correct position, otherwise may cause short-circuit.

3.Short-circuiting, heating, disposing of into fire or disassembling of battery is prohibited.

4.Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.

5.New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.

6.Electrical appliances should be take out the battery when not in use for a long time

7.Exhausted batteries shall be removed from the compartment in order to prevent over-discharge.

8.Prohibit direct welding battery, otherwise it will damage the battery.

9.Battery are to be kept away from children. If swallowed, contact a physician at once.

11.Normal Packing

Every 2 or 3 and 4 batteries or according to customer requirements with

transparent membrane after hot shrinkage, each 60 knots in 1 inner boxes,

16 boxes into 1 box.

12.Storage and shelf life

1.Batteries should be stored in ventilated, cool and dry place。

2.The battery should not be exposed to direct sunlight for a long time or in the rain。

3.Not to mix removed packaging battery stack together

4.Stored at condition of tempreture20℃±2℃, relative humidity 60±15%RH, the battery shelf life is 2 years。

13. Typical discharge curve

Discharge environment：20℃±2℃，RH60±15%

With parameter adjustment, product technology updates, technology specification will update at any time, please do not hesitate to contact to stand for the latest version of the specification.

Recommended