LR14 Black Gold-1S-Strengh Power Technology Co.Ltd.

PRODUCTION

Changzhou Strengh Power Technology Co.Ltd

Product category

What is the battery of the air conditioner remote control

Under normal circumstances, home appliance remote controls use AAA batteries, while cameras, shavers, and wall clocks use AAA batteries. Therefore, the air conditioner remote control is also a AAA battery. If we are not sure, we can determine it by measuring the diameter and length of the battery. No. 7 battery is 43.6 mm high and 10.1 mm in diameter, while No. 5 battery is 14 mm in diameter and 49 mm in height.

New Factory

03/01

What is the difference between acid batteries and alkaline batteries?

03/30

What is the difference between acid batteries and alkaline batteries?

03/30

LR14 Black Gold-1S

The company mainly produces over 50 varieties of alkaline batteries, carbon batteries, button type lithium manganese batteries, and other products, which are widely used in electronic appliances such as automobiles, computer motherboards, remote controls, and so on

Keywords: alkaline battery | button type lithium manganese battery | carbon battery

Category:

Industrial outfit

Message

Contact

Model:

LR14

Standard:

1.5V

Product Size:

26.2（D）*50（H）

Weight:

65g

Package:

Shrink/hang card

Certification:

CE，ROHS，SGS，REACH，UL，KC，UN38.3，MSDS

E-mail：zoey@anyida-power.com
Tel：0519 -83270441

Detailed description

1.Scope

This specification provides the technical requirements of alkaline manganese dioxide battery (LR14).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is no any other detail requirements.

1.1Reference Standards

GB/T8897.1 (IEC60086-1,MOD)（Primary Battery Part 1:General）

GB/T8897.2 (IEC60086-2,MOD)（Primary Battery Part2:Size and Technical requirements）

GB8897.5 (IEC 60086-5,MOD)（Primary Battery Part5：Safety of batteries with aqueous electrolyte）

1.2Environmental Protection Standard

The battery meets the standard of EU battery directives 2006/66/EC.

2.Chemical system, Voltage and Designation

Chemical system：Zn-MnO2(KOH),without Hg &Cr

Nominal Voltage: 1.5V

Designation : IEC：LR14 ANSI: C JIS:AM-2 Others: E93

3.Battery Size

Battery meets the picture standard

3.1 Inspection Tool

Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers.

3.2 Acceptance Method

Using GB2828.1-2003 sampling program, special sampling S-3,acceptance quality limitation: AQL=1.0

4.Weight and discharging capacity

Battery weight about:65g

Discharging capacity:5000mAh(Loading3.9Ω，24h/day,20±2℃ RH60±15%,End-point Voltage0.9V)

5.Open circuit voltage, loading voltage and short-circuit current

Project	Open circuit Voltage（V）	Loading Voltage（V）	Short-circuit Voltage（A）	Sampling Voltage
In 2 months New battery	1.60	1.45	8.00	GB2828.1-2003 One Sampling, special sampling S-4,AQL=1.0
12 months storage in room temperature	1.56	1.40	6.00
Inspection Condition	Loading 3.9Ω, loading time 0.3s，temp:20±2℃

6.Discharging Ability

Discharging Temp：20±2℃
Condition			GB/T8897.2-2008 Requirements	Shortest Average Discharging Time
Load	Discharging Way	End-point Voltage		2 months new battery	12 months storage battery
3.9Ω	4min/h,8h/d	0.9 V	770min	900min	810min
3.9Ω	1h/d	0.8 V	12h	17h	15.5h
6.8Ω	1h/d	0.9 V	23h	30h	27h
20Ω	4h/d	0.9 V	77h	90h	81h
3.9Ω	24h/d	0.9 V	/	16h	14.5h

Accordance of shortest discharging time

1）Testing 9 batteries of each discharging way；

2）The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement；

3）The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again。This lot of batteries are qualified if the result meets the NO.2 provision. If not qualified then will not test again.

7.Anti-leakage ability

Project	Condition	Requirements	Qualified Standard
Over Discharging	Continuous discharging 48h in 20±2℃, huminity 60±15%, load 10Ω condition.	No leakage by visual inspection	N=9 Ac=0 Re=1
High-temp storage	Storing in 60±2℃, relative humidity 90% condition for 20 days.		N=30 Ac=1 Re=2

8.Safety Requirements

Project	Condition	Requirements	Qualified Standard
External Short-circuit	Using wire to connect positive and negative pole in 20±2℃ for 24h.	No Explosion	N=5 Ac=0 Re=1
Improper Equipment	4 batteries in series connection, one of them is in reverse connection.	Leakage happened on the reversed battery or the shell temp reduce to room temp	N=4×5 Ac=0 Re=1

9.Signs

The following signs are on the battery body：

1.Model：LR14/C

2.Manufacturer and brand：Daily-max

3.Battery Poles：“+”and“-”

4.Expiry date or manufacturing date

5.Warnings.

10. Cautions for using

1.This battery can’t be charged, leakage and explosion may happen when charging.

2.Make sure the battery is in correct position as + and -.

3.Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited.

4.Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.

5.New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.

6.The battery should be taken out from the device which will not be used for a long time.

7.Exhausted battery should be taken out from the device.

8.Welding batteries are prohibited or it will cause damage.

9.The batteries should be kept from children, if swallowed, contact a doctor immediately.

11.Normal Package

Each 12 pieces in one inner box,20 boxes in one carton.

12.Storage and Expiry

1.Batteries should be put in cool, dry and with air-flowing places

2.The batteries should not be exposed in sunshine or in raining places.

3.Do not mix the batteries which without labels

4.Storing in 20℃±2℃, 60±15%RH condition. The storage time is 3 years.

13. Nominal discharging curve

Discharging condition：20℃±2℃，RH60±15%

With the progress of product technology, technical parameters, the specification will be updated too, please contact Anyida for latest specification.

Recommended

6F22 9V

6LR61-1B hanging card

6LR61-B

Message

Southern door, NO.1 East Road, Lou Xia Industrial Park,Rulin Town, Jintan District, Changzhou city, Jiangsu,China

zoey@anyida-power.com

》Lithium Manganese Battery

CONTACT

Whether online, email or telephone consultation, we will immediately provide professional Q&A guidance.

[Business License] IPv6